Close
Clinician’s Choice DualForce Ring Forceps
Clinician's Choice DualForce Ring Forceps
Engineered for more than just tight contacts, DualForce is a complete matrix system designed for use with all Class II composite restorations. The DualForce System consists of clinically and technologically advanced Rings, Active-Wedges, and Ultra-Wrap Matrix Bands.
> Prevents overextension and Ring fatigue during placement
> Properly angled engagement tips that match DualForce Rings for easy placement
> Thick gauge steel for added stability
> Fits virtually all hand sizes
Close
Clinician’s Choice DualForce Rings Assorted (2)
Clinician's Choice DualForce Rings Assorted (2)
Engineered using unique, dual Nickel Titanium wires and independent interproximal separators, DualForce provides significant and balanced separation force (mesial/distal) and an excellent matrix/tooth seal. Using Nickel Titanium wire renders the DualForce Rings resistant to fatigue so you will have consistent separation force throughout the life of the ring.
> DualForce Rings engage the tooth more firmly and are very stable
> Less hand strain is required to open the rings, yet separation force on the teeth is stronger
> 20° angle placement of Ring increases separation force and prevents cusp and rubber dam clamp interference
> Interproximal separators are made with non-stick, durable plastic, preventing composite and adhesive stick, and breakage
> Ideal for stacking or butterfly placement techniques
Includes
1 x DualForce Ring Pre-Molar Orange
1 x DualForce Ring Molar Green
Close
Clinician’s Choice DualForce Rings Molar Green (1)
Clinician's Choice DualForce Rings Molar Green (1)
Engineered using unique, dual Nickel Titanium wires and independent interproximal separators, DualForce provides significant and balanced separation force (mesial/distal) and an excellent matrix/tooth seal. Using Nickel Titanium wire renders the DualForce Rings resistant to fatigue so you will have consistent separation force throughout the life of the ring.
> DualForce Rings engage the tooth more firmly and are very stable
> Less hand strain is required to open the rings, yet separation force on the teeth is stronger
> 20° angle placement of Ring increases separation force and prevents cusp and rubber dam clamp interference
> Interproximal separators are made with non-stick, durable plastic, preventing composite and adhesive stick, and breakage
> Ideal for stacking or butterfly placement techniques
Close
Clinician’s Choice DualForce Rings Molar Green (2)
Clinician's Choice DualForce Rings Molar Green (2)
Engineered using unique, dual Nickel Titanium wires and independent interproximal separators, DualForce provides significant and balanced separation force (mesial/distal) and an excellent matrix/tooth seal. Using Nickel Titanium wire renders the DualForce Rings resistant to fatigue so you will have consistent separation force throughout the life of the ring.
> DualForce Rings engage the tooth more firmly and are very stable
> Less hand strain is required to open the rings, yet separation force on the teeth is stronger
> 20° angle placement of Ring increases separation force and prevents cusp and rubber dam clamp interference
> Interproximal separators are made with non-stick, durable plastic, preventing composite and adhesive stick, and breakage
> Ideal for stacking or butterfly placement techniques
Close
Clinician’s Choice DualForce Rings Pre-Molar Orange (2)
Clinician's Choice DualForce Rings Pre-Molar Orange (2)
Engineered using unique, dual Nickel Titanium wires and independent interproximal separators, DualForce provides significant and balanced separation force (mesial/distal) and an excellent matrix/tooth seal. Using Nickel Titanium wire renders the DualForce Rings resistant to fatigue so you will have consistent separation force throughout the life of the ring.
> DualForce Rings engage the tooth more firmly and are very stable
> Less hand strain is required to open the rings, yet separation force on the teeth is stronger
> 20° angle placement of Ring increases separation force and prevents cusp and rubber dam clamp interference
> Interproximal separators are made with non-stick, durable plastic, preventing composite and adhesive stick, and breakage
> Ideal for stacking or butterfly placement techniques
Close
Clinician’s Choice DualForce Sectional Matrix System Complete Kit
Clinician's Choice DualForce Sectional Matrix System Complete Kit
Engineered for more than just tight contacts, DualForce is a complete matrix system designed for use with all Class II composite restorations. The DualForce System consists of clinically and technologically advanced Rings, Active-Wedges, and Ultra-Wrap Matrix Bands.
> DualForce Rings are easier to open and provide 37% more separation force
> Ultra-Wrap Matrix Bands hug tooth better, reducing flash
> DualForce Active-Wedges reduce finishing time by minimizing flash
> Unrivalled Ring stability after placement
> Active-Wedges provide 2lbs of separation force
> Composite/adhesive won’t stick to DualForce Rings
> Active-Wedges are contoured to help seal matrix at proximal box
> Punch Pliers pierce Matrix Band for easy Band removal
Includes
1 x DualForce Ring Pre-Molar Orange
1 x DualForce RingsMolar Green
25 x DualForce Ultra-Wrap Sectional Matrix Bands 4.5mm
25 x DualForce Ultra-Wrap Sectional Matrix Bands 5.5mm
25 x DualForce Ultra-Wrap Sectional Matrix Bands 6.5mm
20 x DualForce Active-Wedges Size 1 Purple
20 x DualForce Active-Wedges Size 2 White
20 x DualForce Active-Wedges Size 3 Blue
20 x DualForce Active-Wedges Size 4 Green
20 x DualForce Active-Wedges Size 5 Black
1 x DualForce Punch Pliers
1 x DualForce Ring Forceps
Close
Clinician’s Choice DualForce Sectional Matrix System Starter Kit
Clinician's Choice DualForce Sectional Matrix System Starter Kit
Engineered for more than just tight contacts, DualForce is a complete matrix system designed for use with all Class II composite restorations. The DualForce System consists of clinically and technologically advanced Rings, Active-Wedges, and Ultra-Wrap Matrix Bands.
> DualForce Rings are easier to open and provide 37% more separation force
> Ultra-Wrap Matrix Bands hug tooth better, reducing flash
> DualForce Active-Wedges reduce finishing time by minimizing flash
> Unrivalled Ring stability after placement
> Active-Wedges provide 2lbs of separation force
> Composite/adhesive won’t stick to DualForce Rings
> Active-Wedges are contoured to help seal matrix at proximal box
> Punch Pliers pierce Matrix Band for easy Band removal
Includes
1 x DualForce Ring Pre-Molar Orange
1 x DualForce RingsMolar Green
25 x DualForce Ultra-Wrap Sectional Matrix Bands 4.5mm
25 x DualForce Ultra-Wrap Sectional Matrix Bands 5.5mm
25 x DualForce Ultra-Wrap Sectional Matrix Bands 6.5mm
20 x DualForce Active-Wedges Size 1 Purple
20 x DualForce Active-Wedges Size 2 White
20 x DualForce Active-Wedges Size 3 Blue
20 x DualForce Active-Wedges Size 4 Green
20 x DualForce Active-Wedges Size 5 Black
Close
Clinician’s Choice DualForce Ultra-Wrap Sectional Matrix Bands 4.5mm (100)
Clinician's Choice DualForce Ultra-Wrap Sectional Matrix Bands
DualForce Ultra-Wrap Matrix Bands are designed to wrap the tooth snugly, making them truly versatile. DualForce bands are thin, yet stiff enough to prevent crimping during placement. An interproximal contour and marginal ridge ensure a natural contact is created every time.
> Curved marginal ridge of matrix bands reduces finishing time
> Ultra contoured matrix bands are more stable, making ring placement easier
> Proximal contour of band ensures optimal contact position and shape
> Matrix tab allows easy placement and removal
> Available in three sizes 4.5mm, 5.5mm and 6.5mm
> Unique Punch Pliers, included in Complete Kit or sold individually, allow for an easy grip of the matrix band when placing, while punching the band for secure removal
Close
Clinician’s Choice DualForce Ultra-Wrap Sectional Matrix Bands 5.5mm (100)
Clinician's Choice DualForce Ultra-Wrap Sectional Matrix Bands
DualForce Ultra-Wrap Matrix Bands are designed to wrap the tooth snugly, making them truly versatile. DualForce bands are thin, yet stiff enough to prevent crimping during placement. An interproximal contour and marginal ridge ensure a natural contact is created every time.
> Curved marginal ridge of matrix bands reduces finishing time
> Ultra contoured matrix bands are more stable, making ring placement easier
> Proximal contour of band ensures optimal contact position and shape
> Matrix tab allows easy placement and removal
> Available in three sizes 4.5mm, 5.5mm and 6.5mm
> Unique Punch Pliers, included in Complete Kit or sold individually, allow for an easy grip of the matrix band when placing, while punching the band for secure removal
Close
Clinician’s Choice DualForce Ultra-Wrap Sectional Matrix Bands 6.5mm (100)
Clinician's Choice DualForce Ultra-Wrap Sectional Matrix Bands
DualForce Ultra-Wrap Matrix Bands are designed to wrap the tooth snugly, making them truly versatile. DualForce bands are thin, yet stiff enough to prevent crimping during placement. An interproximal contour and marginal ridge ensure a natural contact is created every time.
> Curved marginal ridge of matrix bands reduces finishing time
> Ultra contoured matrix bands are more stable, making ring placement easier
> Proximal contour of band ensures optimal contact position and shape
> Matrix tab allows easy placement and removal
> Available in three sizes 4.5mm, 5.5mm and 6.5mm
> Unique Punch Pliers, included in Complete Kit or sold individually, allow for an easy grip of the matrix band when placing, while punching the band for secure removal
Close
Clinician’s Choice DualForce Ultra-Wrap Sectional Matrix Trial Kit
Clinician's Choice DualForce Ultra-Wrap Sectional Matrix Trial Kit
Engineered for more than just tight contacts, DualForce is a complete matrix system designed for use with all Class II composite restorations. The DualForce System consists of clinically and technologically advanced Rings, Active-Wedges, and Ultra-Wrap Matrix Bands.
> DualForce Rings are easier to open and provide 37% more separation force
> Ultra-Wrap Matrix Bands hug tooth better, reducing flash
> DualForce Active-Wedges reduce finishing time by minimizing flash
> Unrivalled Ring stability after placement
> Active-Wedges provide 2lbs of separation force
> Composite/adhesive won’t stick to DualForce Rings
> Active-Wedges are contoured to help seal matrix at proximal box
> Punch Pliers pierce Matrix Band for easy Band removal
Includes
25 x DualForce Ultra-Wrap Sectional Matrix Bands 4.5mm
25 x DualForce Ultra-Wrap Sectional Matrix Bands 5.5mm
25 x DualForce Ultra-Wrap Sectional Matrix Bands 6.5mm
Close
Clinician’s Choice Esthetic Contouring Instrument Blue Grip
Clinician's Choice Esthetic Contouring Instrument
Highly detailed anterior composite restorations require specifically designed instruments to properly manipulate and contour the material, especially along the cervical margins. The Clinician’s Choice Esthetic Contouring Instruments make anterior composite restorations easy!
The Gold Grip features a convex paddle to spread composite across the facial plane for diastemas, Class IV and Class V restorations. The long, flat, thin and flexible blade makes interproximal composite placement and manipulation a breeze.
The Blue Grip features a bladed end which allows trimming of excess composite and to cut grooves in the material to create the illusion of enamel cracks. With the opposing blade, ripples may be created prior to cutting for better light reflection.
Close
Clinician’s Choice Esthetic Contouring Instrument Blue Grip Replacement Tip
Clinician's Choice Esthetic Contouring Instrument
Highly detailed anterior composite restorations require specifically designed instruments to properly manipulate and contour the material, especially along the cervical margins. The Clinician’s Choice Esthetic Contouring Instruments make anterior composite restorations easy!
The Gold Grip features a convex paddle to spread composite across the facial plane for diastemas, Class IV and Class V restorations. The long, flat, thin and flexible blade makes interproximal composite placement and manipulation a breeze.
The Blue Grip features a bladed end which allows trimming of excess composite and to cut grooves in the material to create the illusion of enamel cracks. With the opposing blade, ripples may be created prior to cutting for better light reflection.
Close
Clinician’s Choice Esthetic Contouring Instrument Gold Grip
Clinician's Choice Esthetic Contouring Instrument
Highly detailed anterior composite restorations require specifically designed instruments to properly manipulate and contour the material, especially along the cervical margins. The Clinician’s Choice Esthetic Contouring Instruments make anterior composite restorations easy!
The Gold Grip features a convex paddle to spread composite across the facial plane for diastemas, Class IV and Class V restorations. The long, flat, thin and flexible blade makes interproximal composite placement and manipulation a breeze.
The Blue Grip features a bladed end which allows trimming of excess composite and to cut grooves in the material to create the illusion of enamel cracks. With the opposing blade, ripples may be created prior to cutting for better light reflection.
Close
Clinician’s Choice Esthetic Contouring Instrument Gold Grip Replacement Tip
Clinician's Choice Esthetic Contouring Instrument
Highly detailed anterior composite restorations require specifically designed instruments to properly manipulate and contour the material, especially along the cervical margins. The Clinician’s Choice Esthetic Contouring Instruments make anterior composite restorations easy!
The Gold Grip features a convex paddle to spread composite across the facial plane for diastemas, Class IV and Class V restorations. The long, flat, thin and flexible blade makes interproximal composite placement and manipulation a breeze.
The Blue Grip features a bladed end which allows trimming of excess composite and to cut grooves in the material to create the illusion of enamel cracks. With the opposing blade, ripples may be created prior to cutting for better light reflection.
Close
Clinician’s Choice Heatwave Customisable Impression Trays Intro Kit (32)
Clinician's Choice Heatwave Customisable Impression Trays Intro Kit (32)
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Includes
4 x Heatwave Impression Tray Size 42
4 x Heatwave Impression Tray Size 43
4 x Heatwave Impression Tray Size 44
4 x Heatwave Impression Tray Size 45
4 x Heatwave Impression Tray Size 51
4 x Heatwave Impression Tray Size 52
4 x Heatwave Impression Tray Size 53
4 x Heatwave Impression Tray Size 54
1 x Heatwave Measuring Calliper
1 x Heatwave Measuring Chart
Close
Clinician’s Choice Heatwave Customisable Impression Trays Mini Intro Kit (8)
Clinician's Choice Heatwave Customisable Impression Trays Mini Intro Kit (8)
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Includes
1 x Heatwave Impression Tray Size 42
1 x Heatwave Impression Tray Size 43
1 x Heatwave Impression Tray Size 44
1 x Heatwave Impression Tray Size 45
1 x Heatwave Impression Tray Size 51
1 x Heatwave Impression Tray Size 52
1 x Heatwave Impression Tray Size 53
1 x Heatwave Impression Tray Size 54
1 x Heatwave Measuring Calliper
1 x Heatwave Measuring Chart
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 42 Upper Orange (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 43 Upper Orange (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 44 Upper Orange (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 45 Upper Orange (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 51 Lower Yellow (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 52 Lower Yellow (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 53 Lower Yellow (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes