Close
3M Directed Flow Impression Trays Disposable Large Lower (10)
3M Directed Flow Impression Trays Disposable
Eliminate the need for a tray adhesive and simplify both preliminary and final impressions with this innovative, single-use tray from 3M.
> Revolutionary self-retentive fleece strip eliminates the need for a tray adhesive for a simplified and time saving process
> Retentive fleece features striations that act as a barrier to avoid tooth/tray contact and occlusal flat-spots for better impression results
> Innovative, directed-flow design minimises flow defects and distal voids for accurate impressions
> Can be easily customised making them suited for implant impressions - allow for accurate impressions of the soft and hard tissue as well as of the implant system's transfer copings
> Surrounding retention lip reduces material overflows
> Built-in reservoir reduces gagging for better patient comfort
> Single-use tray means there is no need to disinfect and clean, as with metal trays, for improved infection control
> Delivers outstanding quality, accurate results and easy handling
> Rigid material provides the stability that is ideal for both preliminary and final impressions
> No unpleasant odour or mess from a tray adhesive
> Tray can be customised, if needed
Close
3M Directed Flow Impression Trays Disposable Large Upper (10)
3M Directed Flow Impression Trays Disposable
Eliminate the need for a tray adhesive and simplify both preliminary and final impressions with this innovative, single-use tray from 3M.
> Revolutionary self-retentive fleece strip eliminates the need for a tray adhesive for a simplified and time saving process
> Retentive fleece features striations that act as a barrier to avoid tooth/tray contact and occlusal flat-spots for better impression results
> Innovative, directed-flow design minimises flow defects and distal voids for accurate impressions
> Can be easily customised making them suited for implant impressions - allow for accurate impressions of the soft and hard tissue as well as of the implant system's transfer copings
> Surrounding retention lip reduces material overflows
> Built-in reservoir reduces gagging for better patient comfort
> Single-use tray means there is no need to disinfect and clean, as with metal trays, for improved infection control
> Delivers outstanding quality, accurate results and easy handling
> Rigid material provides the stability that is ideal for both preliminary and final impressions
> No unpleasant odour or mess from a tray adhesive
> Tray can be customised, if needed
Close
3M Directed Flow Impression Trays Disposable Medium Lower (10)
3M Directed Flow Impression Trays Disposable
Eliminate the need for a tray adhesive and simplify both preliminary and final impressions with this innovative, single-use tray from 3M.
> Revolutionary self-retentive fleece strip eliminates the need for a tray adhesive for a simplified and time saving process
> Retentive fleece features striations that act as a barrier to avoid tooth/tray contact and occlusal flat-spots for better impression results
> Innovative, directed-flow design minimises flow defects and distal voids for accurate impressions
> Can be easily customised making them suited for implant impressions - allow for accurate impressions of the soft and hard tissue as well as of the implant system's transfer copings
> Surrounding retention lip reduces material overflows
> Built-in reservoir reduces gagging for better patient comfort
> Single-use tray means there is no need to disinfect and clean, as with metal trays, for improved infection control
> Delivers outstanding quality, accurate results and easy handling
> Rigid material provides the stability that is ideal for both preliminary and final impressions
> No unpleasant odour or mess from a tray adhesive
> Tray can be customised, if needed
Close
3M Directed Flow Impression Trays Disposable Medium Upper (10)
3M Directed Flow Impression Trays Disposable
Eliminate the need for a tray adhesive and simplify both preliminary and final impressions with this innovative, single-use tray from 3M.
> Revolutionary self-retentive fleece strip eliminates the need for a tray adhesive for a simplified and time saving process
> Retentive fleece features striations that act as a barrier to avoid tooth/tray contact and occlusal flat-spots for better impression results
> Innovative, directed-flow design minimises flow defects and distal voids for accurate impressions
> Can be easily customised making them suited for implant impressions - allow for accurate impressions of the soft and hard tissue as well as of the implant system's transfer copings
> Surrounding retention lip reduces material overflows
> Built-in reservoir reduces gagging for better patient comfort
> Single-use tray means there is no need to disinfect and clean, as with metal trays, for improved infection control
> Delivers outstanding quality, accurate results and easy handling
> Rigid material provides the stability that is ideal for both preliminary and final impressions
> No unpleasant odour or mess from a tray adhesive
> Tray can be customised, if needed
Close
3M Directed Flow Impression Trays Disposable Small Lower (10)
3M Directed Flow Impression Trays Disposable
Eliminate the need for a tray adhesive and simplify both preliminary and final impressions with this innovative, single-use tray from 3M.
> Revolutionary self-retentive fleece strip eliminates the need for a tray adhesive for a simplified and time saving process
> Retentive fleece features striations that act as a barrier to avoid tooth/tray contact and occlusal flat-spots for better impression results
> Innovative, directed-flow design minimises flow defects and distal voids for accurate impressions
> Can be easily customised making them suited for implant impressions - allow for accurate impressions of the soft and hard tissue as well as of the implant system's transfer copings
> Surrounding retention lip reduces material overflows
> Built-in reservoir reduces gagging for better patient comfort
> Single-use tray means there is no need to disinfect and clean, as with metal trays, for improved infection control
> Delivers outstanding quality, accurate results and easy handling
> Rigid material provides the stability that is ideal for both preliminary and final impressions
> No unpleasant odour or mess from a tray adhesive
> Tray can be customised, if needed
Close
3M Directed Flow Impression Trays Disposable Small Upper (10)
3M Directed Flow Impression Trays Disposable
Eliminate the need for a tray adhesive and simplify both preliminary and final impressions with this innovative, single-use tray from 3M.
> Revolutionary self-retentive fleece strip eliminates the need for a tray adhesive for a simplified and time saving process
> Retentive fleece features striations that act as a barrier to avoid tooth/tray contact and occlusal flat-spots for better impression results
> Innovative, directed-flow design minimises flow defects and distal voids for accurate impressions
> Can be easily customised making them suited for implant impressions - allow for accurate impressions of the soft and hard tissue as well as of the implant system's transfer copings
> Surrounding retention lip reduces material overflows
> Built-in reservoir reduces gagging for better patient comfort
> Single-use tray means there is no need to disinfect and clean, as with metal trays, for improved infection control
> Delivers outstanding quality, accurate results and easy handling
> Rigid material provides the stability that is ideal for both preliminary and final impressions
> No unpleasant odour or mess from a tray adhesive
> Tray can be customised, if needed
Close
Clinician’s Choice Heatwave Customisable Impression Trays Intro Kit (32)
Clinician's Choice Heatwave Customisable Impression Trays Intro Kit (32)
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Includes
4 x Heatwave Impression Tray Size 42
4 x Heatwave Impression Tray Size 43
4 x Heatwave Impression Tray Size 44
4 x Heatwave Impression Tray Size 45
4 x Heatwave Impression Tray Size 51
4 x Heatwave Impression Tray Size 52
4 x Heatwave Impression Tray Size 53
4 x Heatwave Impression Tray Size 54
1 x Heatwave Measuring Calliper
1 x Heatwave Measuring Chart
Close
Clinician’s Choice Heatwave Customisable Impression Trays Mini Intro Kit (8)
Clinician's Choice Heatwave Customisable Impression Trays Mini Intro Kit (8)
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Includes
1 x Heatwave Impression Tray Size 42
1 x Heatwave Impression Tray Size 43
1 x Heatwave Impression Tray Size 44
1 x Heatwave Impression Tray Size 45
1 x Heatwave Impression Tray Size 51
1 x Heatwave Impression Tray Size 52
1 x Heatwave Impression Tray Size 53
1 x Heatwave Impression Tray Size 54
1 x Heatwave Measuring Calliper
1 x Heatwave Measuring Chart
Close
Clinician’s Choice Heatwave Customisable Impression Trays Quadrant Left & Right (10)
Clinician's Choice Heatwave Customisable Impression Trays Quadrant Left & Right (10)
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Includes
5 x Heatwave Impression Tray Upper Left Lower Right
5 x Heatwave Impression Tray Upper Right Lower Left
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 42 Upper Orange (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 43 Upper Orange (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 44 Upper Orange (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 45 Upper Orange (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 51 Lower Yellow (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 52 Lower Yellow (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 53 Lower Yellow (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Size 54 Lower Yellow (10)
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Heatwave Customisable Impression Trays Sizing Chart
Heatwave Customisable Impression Trays
Heatwave Customisable Impression Trays represents a noteworthy evolution in impression trays. We took a truly anatomically designed tray and added the ability to self-customise chair-side. The result is an ideal fit with vertical drive that rivals that of a custom tray for perfectly precise impressions every time.
Heatwave Customizable Impression Trays allow clinicians to easily self-customise the trays by hand. After immersion in water for 60 seconds at 70°C, the thermoplastic tray can be shaped and moulded to a patient’s particular arch size and contour. After adaption, the tray will assume its normal rigidity at room temperature or by running under cold water. This allows for a precise impression.
> Chairside, heat customisable impression trays provide a significant advantage for all full-arch impressions, and specifically in cases of exostoses, tori and mal-positioned teeth
> Eliminates the need for time-consuming and expensive custom or laboratory fabricated trays
> Anatomically correct, requires 40% less impression material
> Eliminates patient discomfort caused when stock trays get caught up on bony anatomical variances
> Custom fit allows for uniform compression of the impression material, which contributes to increased impression accuracy and a reduction in the amount of impression material used
> Available in 4 upper (salmon coloured) and 4 lower (yellow coloured) sizes
Close
Clinician’s Choice Impression Trays Disposable Clear Anterior Universal (25)
Clinician's Choice Impression Trays Disposable Clear
Clinician's Choice clear impression trays are designed for use with Template Clear and Affinity Crystal to create a clear matrix for provisional veneers.
> Clear, non-perforated impression trays
> Create a clear and accurate matrix for veneer temporaries
> Available in Universal Anterior, Full Arch Upper, Full Arch Lower and Quadrant Trays Left and Right
> Available in packets of 6 or 25
Close
Clinician’s Choice Impression Trays Disposable Clear Anterior Universal (6)
Clinician's Choice Impression Trays Disposable Clear
Clinician's Choice clear impression trays are designed for use with Template Clear and Affinity Crystal to create a clear matrix for provisional veneers.
> Clear, non-perforated impression trays
> Create a clear and accurate matrix for veneer temporaries
> Available in Universal Anterior, Full Arch Upper, Full Arch Lower and Quadrant Trays Left and Right
> Available in packets of 6 or 25
Close
Clinician’s Choice Impression Trays Disposable Clear Full Arch Medium Lower (25)
Clinician's Choice Impression Trays Disposable Clear
Clinician's Choice clear impression trays are designed for use with Template Clear and Affinity Crystal to create a clear matrix for provisional veneers.
> Clear, non-perforated impression trays
> Create a clear and accurate matrix for veneer temporaries
> Available in Universal Anterior, Full Arch Upper, Full Arch Lower and Quadrant Trays Left and Right
> Available in packets of 6 or 25
Close
Clinician’s Choice Impression Trays Disposable Clear Full Arch Medium Lower (6)
Clinician's Choice Impression Trays Disposable Clear
Clinician's Choice clear impression trays are designed for use with Template Clear and Affinity Crystal to create a clear matrix for provisional veneers.
> Clear, non-perforated impression trays
> Create a clear and accurate matrix for veneer temporaries
> Available in Universal Anterior, Full Arch Upper, Full Arch Lower and Quadrant Trays Left and Right
> Available in packets of 6 or 25
Close
Clinician’s Choice Impression Trays Disposable Clear Full Arch Medium Upper (25)
Clinician's Choice Impression Trays Disposable Clear
Clinician's Choice clear impression trays are designed for use with Template Clear and Affinity Crystal to create a clear matrix for provisional veneers.
> Clear, non-perforated impression trays
> Create a clear and accurate matrix for veneer temporaries
> Available in Universal Anterior, Full Arch Upper, Full Arch Lower and Quadrant Trays Left and Right
> Available in packets of 6 or 25
Close
Clinician’s Choice Impression Trays Disposable Clear Full Arch Medium Upper (6)
Clinician's Choice Impression Trays Disposable Clear
Clinician's Choice clear impression trays are designed for use with Template Clear and Affinity Crystal to create a clear matrix for provisional veneers.
> Clear, non-perforated impression trays
> Create a clear and accurate matrix for veneer temporaries
> Available in Universal Anterior, Full Arch Upper, Full Arch Lower and Quadrant Trays Left and Right
> Available in packets of 6 or 25