Melag MELAseal 200 Heat Sealing Device

Melag MELAseal 200 Heat Sealing Device
The MELAseal 200 combines proven reliability with simple operation and a compact footprint. This validatable bar sealer is ready for use just 90 seconds after activation and seals sterilisation packaging (e.g. MELAfol) in as little as three seconds per cycle. Integrated electronics continuously monitor sealing parameters for compliance with international hygiene standards.

Equipped with dual USB interfaces, the device enables easy documentation via USB flash drive or connection to a practice computer or network (MELAtrace software required). Its intuitive LCD display and four-key control panel make operation fast and user-friendly.

Features
> Fast pre-heating and sealing times for efficient workflow
> Validatable and compliant with international hygiene standards
> Compact footprint saves worktop space
> Intuitive LCD display and four-button operation
> Dual USB interfaces for easy log file export
> Continuous monitoring of sealing pressure, time and temperature
> Power saving mode and seal check function for maximum efficiency

Specifications
Dimensions: 415mm x 150mm x 240mm (WxHxD)
Weight: 5.4kg
Documentation Interfaces: 1x USB stick, 1x USB computer interface
Seal Seam Width: 10mm
Seal Seam Length: 275mm
Sealing Time: 3 seconds approximately
Temperature range: 100°C and 210°C
Pre-Heating Time: 90 seconds approximately
Electrical Connection: 230 Volt/50-60 Hz
Maximum Power Consumption: 300 Watts